A corner flat can be found at the end of the construction: this is, a part of its walls are not adjacent to the neighbors, however are the outer partitions of the home.
There may be one apartment in a corner flat – it occupies the entire end of the home, it is also called a corner apartment. Or two – the windows of one overlook the road, the second – the yard. Depends on the building program, the layout of the assumptions.
There’s also a”different caste” – housing with walls in the expansion joints. These”gaps” between entrances are typically made in multi-story structures, the principal job of the unit – to split the deformation forces throughout the shrinkage of the building, in the event of emergencies. Pros and cons of corner apartments in the joint are somewhat different from the conventional ones with access to the road – we will pay particular attention to the subject in the last section.
Considering that the 2-3 sides of this room is outside, in winter it is 3-5C colder, and in summer on the opposite – warmer. Especially if the conclusion of the house is heated from sunlight. In some cases, the gap reaches 10C – however domikday.ru such a difference is improper, suggests a problem with the exterior the home – most probably have to get in touch with the management business, requesting (or forcing) to fulfill their immediate duties, to spot the cracks shaped.
Corner apartment in a brick home with thick walls is much more comfortable. Such dangers are not subjected – the depth of the wall functions as a buffer, so not allowing overheating, overcooling.
When a room has only 1 wall united with the street, it usually has enough space warmth to prevent freezing and warmth. However, when there are two outside walls, and they are adjacent – there’s a high probability of freezing in the corner, the creation of condensation inside, and thus – mold, fungus. Their spores not only spoil the look of the space, but also cause the appearance, complication of many serious ailments.
Important! The problems of corner place are compounded when the factors are related – too low temperatures from heating batteries combined with dampness is sure to cause moldy walls.