Step by step instructions for gluing inner corners
When completing, the main problem can be uneven walls as well as the resulting folds on the background. It is also vital to take into account that when the walls are twisted the joints of background canvases could invisibly.
After gluing the previous one in the front of the interior corner of the cloth must measure the remaining distance. It is measured from the edge of the glued cloth to the adjoining wall, so the resulting amount is inserted 10-15 millimeters. When the partitions are extremely curved, the additional figure could be .
Cut a strip equivalent to the resulting figure, taking into account the allowance. The surfaces have been treated with adhesive. Based on the sort of coat it may be only the wall or the surfaces.
The strip is then glued independently using the cut side into the wallsocket. The background should go on the opposite plane.
In case the glued background is wrinkled, you have to make a few small cuts perpendicular to the folds.
Level or incline on the adjacent wall is a perpendicular line. The distance from the corner is equivalent to the diameter of the last cut strip, not adding developments.
The surfaces have been smeared with glue, and then the coat is glued into the wall with the flat side into the line. The cut side goes onto the adjoining wall.
How to paste the outer corner (outer corner)?
Protruding corner should be glued by analogy using the interior, however there are little gaps, which also have to be taken into account when working.
Measured the space remaining in the glued wallpaper into the adjoining wall. Add 20-25 millimeters to the obtained figure.
A segment is cut away, taking into account the added 20-25 millimeters.
Prior to gluing, the surfaces are treated with adhesive.
The even edge has to be glued to the wallpaper fixed onto the wall, the own cut side”goes” to the next plane. If necessary, small cuts are made in the area of visiting the other wallpaper, smoothed and pushed to the wallsocket.
Draw a vertical strip on the adjacent wall in a distance of only glued cut strip and 6-10 millimeters.
After applying the adhesive, the strip is then applied to the wall with its flat side towards the marked line, going over the edge of the glued strip.
The joints have been smeared with adhesive and ironed with a roller. After that, the gidpola.ru top layer is trimmed across the ruler and the 2 layers are joined together.