On a hot remonttool.ru summer day the water in a little state pool is heated naturally. After the weather is overcast heating time is prolonged or, in general, the temperature does not reach a comfortable temperature of +22oC. In massive pools organic heating takes much longer. To fix this problem, made a heater to the pool, working out of various energy resources.
The simplest water heater for your pool is an heat exchanger. The foundation of this design is a tank, by the liquid flows. It’s connected to the heating system or some other heating water heater. Within the tank is a built-in coil. This part is that the heat exchanger. Pool water circulates throughout the coil, heating against the hot liquid in the tank.
Why do you need such a complicated pool heater if you’re able to just run on the water right throughout the heater? You can use such a scheme, however there are two problems:
- The pool water contains tiny particles of chlorine and other impurities. If warmed, they settle on the walls of this heat exchanger because of solid sludge, clogging it.
- Pool water is saturated with oxygen, which oxidizes the metal walls of the heat exchanger.
To expensive boiler or flow heater does not neglect, the heating process has a second loop. The heat exchanger is easier and more economical to change if it becomes clogged or flows from oxidation of these walls.
In a small children’s pool piping is laid on the principle of the system”underfloor heating”. A little bit of water the coil will heat fast, and with a huge volume won’t cope. Electric models
The 2nd most popular is an electrical heater for the pool, consisting of a body, heating elements along with a thermostat. Devices are in two types:
The system consists of a massive tank, where the water is warmed from the heating components, and from there it is fed into the pool.
The requirement to warm a large amount of water requires the usage of strong devices. Electricity prices are enormous, and you need to put another line of wiring. Heating pump
Rather complicated from the device of this heater to the pool heat pump identifies innovative technology. The device is efficient and cost-effective, however it is rarely used because of its high price.
Significant: The heat pump operates to the principle of their refrigerator, only here the circuit which releases heat, not cold, is in demand.
The machine is composed of 2 circuits, inside which the fluid circulates. The outer pipe has been put underground, at the bottom of the window or alternative place at which you are able to extract the heat. The inner circuit is placed in the pool. It supplies the water that the heat extracted by the outer pipe.